WTInstantTrackerConfiguration Class Reference
Inherits from | NSObject |
---|---|
Declared in | WTInstantTrackerConfiguration.h |
SMARTEnabled
A boolean value that indicates whether SMART is to be used or not.
@property (nonatomic, assign) BOOL SMARTEnabled
Discussion
When set to ‘YES’ the instant tracker will try to use ARKit to perform its tracking. When set to ‘NO’ the instant tracker will use Wikitude’s instant tracking algorithms.
@default YES
Declared In
WTInstantTrackerConfiguration.h
deviceHeightAboveGround
Allows changing the estimated height at which the device is currently above the ground.
@property (nonatomic, assign) float deviceHeightAboveGround
Discussion
Setting this to an appropriate value will allow the augmentations to have a scale close to the one they would have in reality.
@default 1.4 (meters)
Declared In
WTInstantTrackerConfiguration.h
trackingPlaneOrientation
An integer that represents the orientation of the tracking plane in degrees.
@property (nonatomic, assign) float trackingPlaneOrientation
Discussion
The plane orientation is usually set through the instant tracker creation factory method.
@default WTInstantTrackingPlaneOrientationHorizontal
Declared In
WTInstantTrackerConfiguration.h
trackerEfficiencyMode
Use this property to specify the efficiency mode of the tracker.
Please refer to the TrackerEfficiencyMode documentation for more details.
@property (nonatomic, assign) WTTrackerEfficiencyMode trackerEfficiencyMode
Declared In
WTInstantTrackerConfiguration.h
– enablePlaneDetection:
Enables plane detection with a specific configuration.
- (void)enablePlaneDetection:(void ( ^ ) ( WTPlaneDetectionConfiguration *planeDetectionConfiguration ))configuration
Parameters
configuration |
The configuration that defines the behaviour of plane detection. |
---|
Declared In
WTInstantTrackerConfiguration.h